Honda Announces Development of New Honda Hybrid
System with 3-Stage i-VTEC + IMA
New Civic Hybrid powertrain scheduled for fall 2005
introduction
TORRANCE, Calif. 07/05/2005 -- American Honda Motor
Co., Inc., will introduce a New Honda Hybrid System in
the 2006 Civic Hybrid that features a 3-stage i-VTEC
engine that employs Honda's "intelligent" VTEC
(Variable Valve Timing and Lift Electronic Control)
system to provide three stages of valve timing
(low-rpm, high-rpm and cylinder idle mode), combined
with a significantly more compact and efficient Honda
IMA (Integrated Motor Assist) system. The New Honda
Hybrid System will be introduced in the all-new Civic
Hybrid, to be launched this fall, and will offer
significantly improved performance and fuel economy
over the current system.
The New Honda Hybrid System employs intelligent
engine functions and a more efficient IMA system to
achieve an approximate 20 percent increase in system
output over the current system and performance similar
to a 1.8-liter engine while improving fuel economy by
about 5 percent , reducing the system size by 5
percent and attaining a world-leading level of
emissions performance.
The 3-stage i-VTEC engine employs three hydraulic
pathways to couple and uncouple five rocker arm
assemblies, providing three stages of valve control
depending on the driving conditions to achieve a
combination of responsive driving and high fuel
economy. During deceleration when the cylinders are
idle, combustion in all four cylinders is halted and
the cylinders are sealed shut, reducing pumping losses
caused by engine aspiration for a 10 percent
improvement in recovery of braking energy compared to
the current model. To reduce friction, Honda is using
aluminum die-cast pistons (which feature low thermal
expansion for less friction under high-temperature
conditions), ion-plated piston rings and plateau
honing of the cylinder walls for a smoother surface.
Honda's independently developed electric motor
employs coils with high-density windings and
high-performance magnets to attain output 1.5 times
that of the current model while maintaining the same
size. The inverter used to control motor speed--also
independently developed and manufactured by Honda--is
integrated with the motor's ECU for more precise
digital control, contributing to even greater motor
efficiency and fuel economy. Battery output power has
been increased by around 30 percent over the current
model, while a more compact, custom designed battery
storage box offers increased cooling performance and
vibration resistance for enhanced long-term
reliability.
A dynamic regenerative braking system is employed that
hydraulically controls the brakes based on the amount
of brake regeneration. This permits maximum braking
regeneration along with smooth deceleration that
conforms to brake-pedal pressure.
The air conditioner features a hybrid compressor
unit powered by either the engine, an electric motor,
or both. When the engine is in Idle Stop mode, the
motor powers a small compressor. If rapid cooling is
required, an additional compressor powered by the
engine engages also. When the interior temperature is
stable, air conditioning is provided by the motor
alone for both improved comfort and fuel savings.
New Honda Hybrid System Modes of Operation
- Vehicle stationary
- The engine is turned off and fuel consumption
is zero.
- Startup and acceleration
- The engine operates in low-speed valve timing
mode with motor assist.
- Rapid acceleration
- The engine operates in high-speed valve timing
mode with motor assist.
- Low-speed cruising
- The valves of all four of the engine's
cylinders can be closed and combustion halted, the
electric motor alone can power the vehicle.
- Gentle acceleration and high-speed cruising
- The engine operating in low-speed valve timing
mode powers the vehicle.
- Deceleration
- The valves of all four of the engine's
cylinders are closed and combustion halted. The
motor recovers a significant portion of the energy
normally lost during deceleration and stores it in
the battery.
|